|
| Behringer XENYX 802 Mixer | 
 enlarge | Brand: Behringer
Category: Musical Instruments
List Price: $89.99
Buy New: $59.00
You Save: $30.99 (34%)
New (4) from $59.00
Avg. Customer Rating:  2 reviews
Sales Rank: 2001
Shipping Weight (lbs): 11
Dimensions (in): 13.1 x 10.7 x 4.1
The Xenyx 802 has 8 inputs and an FX send control for each channel. Assignable CD/tape inputs have been incorporated for routing flexibility. Behringer's innovative Xenyx mixers provide the home recordist and club musician with pristine sound quality and cutting-edge features for very little outlay. The new Xenyx Mic Preamp approaches the sound quality, transparency, headroom, and even the dynamic range of boutique-style, standalone mic preamps. Behringer's neo-classic British EQ brings back the
MPN: 802
Model: 802
EAN: 4033653020732
ASIN: B000GH9FY4
Availability: Usually ships in 1-3 weeks
|
| Customer Reviews:
 great buy June 5, 2008
1 out of 1 found this review helpful
A great buy for the price. Easy to use, does what it says. You can output to record from like 3 different places on the board, I just use the Tape/Aux out channel. The mic preamp wasn't as spectacular as the description says, but it works great.
 The best things in life are simple--and good to boot December 18, 2007
8 out of 8 found this review helpful
There are products that are designed to wow us with their seemingly infinite scope of features and permutations; at the opposite extreme there are products that sacrifice functionality in order to be aesthetically pleasing. The Behringer Xenyx 802 falls into neither of these categories. It's not fancy, but it has a specific use and it just does it well.
There are several different routing options, including separate outputs for headphone monitoring, control room output, and line out. In addition, this little mixer provides phantom power to up to two microphones. The sound quality is very transparent, and you have to really jack up the gain to hear any background noise. Overall, this device creates the clean, even frequency response of solid state electronics but without the cold, brittle digitalian cast that plagues direct digital recording. I use this for recording on my computer via my Creative Sound Blaster X-Fi XtremeGamer Sound Card ( 70SB073A00000 ); I have a somewhat rare cable which converts stereo 1/4" to stereo RCA, from which point I use a Y-cable to convert to a miniplug (yes, I can hear you audiophiles groaning). Using this setup, with some simple level adjustment on the 802, I can record both my keyboard and my voice (via the AKG Perception 200 Condenser Microphone) with high fidelity. I use this setup for producing demo recordings, but other possible uses include podcasting and pulling mixer duty for a live performance in a small venue.
The on board controls are nothing special, really. The EQ would probably be useful in a pinch, but I generally gravitate toward software-based EQ and effects in lieu of hardware equivalents, if only because I have much more control when using software. I imagine dedicated hardware would probably sound much better, though. Honestly, the 802 doesn't require a degree in rocket surgery to use; an instinctive knowledge of I/O and a basic understanding of audio equipment are the (loose) prerequisites. And, if you have trouble, the manual is very informative. What's more, it takes high honors as the absolute best English translation of a manual that I have ever come across.
As far as build quality, when testing out the controls I found that the knobs felt very solid without being sticky. Unfortunately, my unit does not sit flush on the table; I am not sure if this happens often with this model or brand. Other than this, the 802 seems very well made and I get the impression that it could get kicked around my home studio a lot and still keep on working. Reviews at various online music equipment retailers confirm the above.
My sole complaint about the 802 is that it has a somewhat unconventional metering display: While most audio meters will use a row of yellow LEDs to indicate when a signal is coming close to 0.0 dB (without clipping), on the 802 the yellow LEDs light up when a signal has actually exceeded 0.0 dB and is thus already mildly distorted. This is fine on a tube amp, I suppose, but for a solid state device one would probably not want any distortion, and the color coding of the meter is a little strange given that standpoint. I am more concerned when glancing over at the mixer if I am coming close to 0 dB, and a row of yellow LEDs in the -6 dB through 0 dB range would have been a lot more useful to me.
Still, the above is a very minor issue, and overall this is a wonderful little piece of equipment. Does it come packed with ten million different capabilities and features? No, of course not. But it doesn't follow the annoying modern trend of hiding everything behind a blank exterior with three or so tiny buttons shoved off to the side and out of sight, either (are you reading this Apple and all those like you?). For basic mixing work, small-scale demo recording, podcasting, and intimate live performances, the Behringer Xenyx 802 would be a very useful addition to anyone's equipment arsenal. There's something comforting about analog knobs, something musical in exactly the way that clicking through a series of computer generated dialogs or editing patch parameters with a menu substructure and a pair of up and down buttons just isn't. The tactile sensation inspires a sort of creative mindset, if you will. Call me crazy if you like, but even if analog didn't sound better than digital (please don't get into that debate with me; if you disagree than so be it) I would probably still surround myself with analog equipment.
My recommendation is if you need something unglamorous but very capable of accomplishing its intended use, then the Behringer Xenyx 802 is definitely something you should consider. It's relatively cheap, it's high quality, and it's an overall good beginning investment.
|
|
|
. | |
